Nidek Medical ARK-1S, Operator'S Manual

Page: 80 / 112

74
DEVICE SETTINGS AND MAINTENANCE: Error Messages and Remedies
●
Network communication
Error message Cause and remedy
ERR700
CIFS ERR
•
Error related to Windows file sharing
ERR703
NETWORK ERR
•
Error related to the IC board
IC was damaged by some cause such as electrostatic discharge.
•
If the same error code is displayed again even after the device is turned off and on again,
shut off the device and contact NIDEK or your authorized distributor.
ERR704
DHCP
•
Error related to DHCP
The IP address cannot be obtained.
ERR750
CAN'T ACCESS NET •
Error related to network access
Enabling access to the network may require some time after the device start-up.
•
Check the connection of the LAN cable. Check that the set IP address and subnet mask
are correct.
ERR751
CAN'T WRITE PC •
Write-protection is enabled or no free space is left.
•
Check whether write permission is granted to the destination folder in the PC and suffi-
cient free space is left.
ERR754
PC NAME •
PC with the specified name does not exist.
•
Check the connection of the LAN cable. Or check that the specified PC name is correct.
ERR756
CAN'T LOGON PC •
Logging on to the PC is not allowed. (The user name or password is incorrect.)
•
Check the user name and password and input correctly.
ERR757
NO SHARED FOLDER •
No shared folder exists in the PC. (The name of the shared folder is incorrect.)
•
Check the folder name and whether the folder is set to share.
ERR758
NETWORK TIMEOUT •
The PC did not finish the process in a specified time.
•
Send the data again.
ERR759
CAN'T DELETE PC •
The data cannot be deleted. (Deletion was attempted for data with the read-only attri-
bute.)
•
Disable write-protection.
ERR760
NET INITIALIZING •
Network initialization occurs. (This may require some time after the device start-up.)
•
Retry access to the network later.
ERR761
ACCESS DENIED
•
The file sharing setting of the PC is not proper.
•
Check the file sharing setting of the PC.
ERR762
ACOUNT DISABLED
•
The account is disabled. (The user setting is not proper.)
•
Check the network setting of the device.
ERR763
CAN’T READ PC •
Data cannot be imported.
•
Check the setting of the PC.
ERR766
SAME NAME ERR •
Because a file with the same name exists in the PC, writing is not possible.
•
Change the file name or delete the file.
ERR771
NO NETWORK CABLE •
The LAN cable is not connected.
•
Check the connection of the cable. Check the connection of the connector.
ERR772
NO NETWORK ACK •
Acknowledge error
The file is deleted within 5 seconds or not renamed.
•
Check whether the capture software on the PC is properly activated.