![background image](http://html1.mh-extra.com/html/nidec/si-interbus-2-mbd/si-interbus-2-mbd_user-manual_1687770010.webp)
10
SI-INTERBUS User Guide
Issue Number: 1
2
Introduction
2.1
General
The SI-Interbus option module allows a Control Techniques drive to be connected to an
Interbus network and operate as an Interbus slave device. It will allow transfer of up to
10 x 16-bit cyclic input data and 10 x 16-bit cyclic output data between the local drive
(and its option modules), and external devices on the Interbus network.
The SI-Interbus module can be fitted to any one of the expansion slots in the
Unidrive M200 to M400, Unidrive M600/M7XX, Digitax HD or Commander C200/C300.
2.2
Identification
The SI-Interbus option module can be identified by:
•
The label located on the top of the option module (
Table 2-1
SI-Interbus top label
(500 kBd and 2 MBd)
)
•
The colour of the front bezel (Grey)
Figure 2-1 SI-Interbus option module (2 MBd)
Table 2-1
shows sample module labels that would be fitted to the SI-Interbus modules
Table 2-1 SI-Interbus top label (500 kBd and 2 MBd)
SI-Interbus 500 kBd
SI-Interbus 2 MBd
82400000021220
82400000021230
S/N:3000005001 1914
S/N:3000005001 1914