TITAN 912L Actuator
INSTALLATION REFERENCE MANUAL
MX4685 REV. A ©2019 Nice/HySecurity, 6705 S 209th St, Ste 101, Kent, WA 98032 - TF: 800-321-9947 www.hysecurity.com |
7
2
MOUNT ACTUATOR TO PIVOT ARM
IMAGE 2-1:
INSTALLING ACTUATOR TO PIVOT ARM
IMAGE 2-2:
ACUATOR
LEVEL
IMAGE 2-3:
LEVEL ACTUATOR
(GATE CLOSED)
1. Mount actuator to pivot arm as
shown in IMAGE 2-1 using 1/2” bolt
and lock nut. Tighten lock nut until
secure. Ensure there is no binding.
2. Use bubble level to ensure actua-
tor is level and plumb in both open
and closed positions (IMAGE 2-2 &
2-3).
1/2”x 3.5” BOLT
ACTUATOR
1/2”LOCK NUT
PIVOT ARM
PIVOT ARM
CABLE
LOOP
LEVEL
LEVEL
LEVEL
LEVEL
IMPORTANT!
• Use a bubble level to ensure pivot arm and actuator
are plumb and level in open and close positions.
• Ensure that actuator mounting hardware is tight
enough to prevent movement, vibration, wobble,
or shifting when the actuator is in operation..
• Note cable loop to allow strain relief for cable during
actuator movement.
ACTUATOR
