![background image](http://html1.mh-extra.com/html/nice/titan12l-912l/titan12l-912l_installation-and-reference-manual_1686962014.webp)
TITAN 912L Actuator
INSTALLATION REFERENCE MANUAL
14
|
www.hysecurity.com Nice/HySecurity, 6705 S 209th St, Ste 101, Kent, WA 98032 - TF: 800-321-9947 MX4685 Rev. A ©2019
8
RUN ACTUATOR CABLE(S) TO CONTROL BOX
Run the cable of the actuator closest to the control box through a hole (with rubber grommet) drilled in the
bottom on the control box. If necessary, entry may be made elsewhere on the control box.
If a dual gate installation:
1. Dig a trench across the driveway deep enough to accomodate the longer harness cable from the actuator
farthest from the control box.
2. Run the cable through a conduit and lay this in the trench.
3. Cover the trench and use asphault patch if needed.
4. Run the 2nd cable into a hole (with rubber grommet) in the bottom of the control box.
NOTE:
Ensure the cable(s) reaches into the control box sufficiently to reach the MOTOR inputs on the
control board.
4.2 RUN ACTUATOR CABLE(S) TO CONTROL BOX