TITAN 912L Actuator
INSTALLATION REFERENCE MANUAL
MX4685 REV. A ©2019 Nice/HySecurity, 6705 S 209th St, Ste 101, Kent, WA 98032 - TF: 800-321-9947 www.hysecurity.com |
15
IMAGE 9A-1:
936 BOARD - PULL-TO-OPEN - SINGLE GATE
IMAGE 9A-2:
936 BOARD - PULL-TO-OPEN - DUAL GATE
9A
936 CONTROL BOARD WIRING: PULL-TO-OPEN
IMPORTANT!
For dual gate systems, do NOT yet connect the second actuator to the control board. It will
be connected at a later step in these instructions.
IMPORTANT!
For dual
gate systems, wire the
2nd harness into the
connector, but do not
connect it to the control
board yet. It will be
connected at a later step.
2nd ACTUATOR WITH
LONGER HARNESS
TO MOTOR 2
Connect harness wires to MOTOR 1 for your chosen configuration per Instruction 9A, 9B, 9C, or 9D.
5.1 936 CONTROL BOARD WIRING: PULL-TO-OPEN
SECTION 5: 912L ACTUATOR WIRING
