Nice MhouseKit WG20S, Instructions And Warnings For Installation And Use, Page: 27 / 132

English – 25
English
TECHNICAL SPECIFICATIONS OF PRODUCT COMPONENTS
The product WG20S is produced by Nice S.p.a. (TV) I. In order to improve its products, Nice S.p.a. reserves the right to modify the technical charac-
teristics at any time without prior notice. In any case, the manufacturer guarantees their functionality and
fi tness for the intended purposes. Note: all
technical speci fi cations refer to a temperature of 20°C.
Model/type Straight gearmotor for WG10SK swing gates
Product type Electromechanical gearmotor for automations of automatic gates and doors
Adopted technology 24Vdc motor, helical gear reducer; mechanical release
Maximum start-up torque 1800N
Nominal torque 600N
No-load speed 0.016 mm/s
Speed at nominal torque 0.014m/s
Stroke 480 mm
Maximum frequency of cycles 26 cycles/hour
Maximum frequency of cycles 15 minutes approx.
Application limits
The structural design of this product makes it suitable for use on gates with a weight up to 250 kg or leaf
width up to 4.5 m and opening angle up to 130°
Power supply 24Vdc
Max. absorbed rated power 1,1A,; on start-up, maximum current is 3.6 A for a maximum time interval of 2 s
Ambient operating temperature -20 ÷50°C (gearmotor ef fi ciency is reduced at low temperatures)
Use in particularly acid, saline or
potentially explosive atmospheres
No
Assembly Horizontal with speci fi c fi xing plates
Protection rating IP44
Dimensions / weight 908 x 100 h 117 mm / 10 kg
Photocells PH100
Product type
Presence detector for automations of automatic gates and doors (type D according to standard EN
12453) comprising a transmitter “TX” and receiver “RX
Adopted technology Optical, by direct interpolation of TX-RX with modulated infra-red rays
Detection capacity
Opaque objects located on the optical axis between TX and RX, larger than 50 mm and moving slower
than 1.6 m/s
TX transmission angle 20° approx.
RX reception angle 20° approx.
Useful range
10 m for maximum TX-RX misalignment ±5° (the device can signal an obstacle even in the event of
particularly adverse weather conditions
Power supply / output
The device can only be connected to the “ECSBus” networks from which it receives mains power, and
sends the output signals
Absorbed power 1 ECSBus unit
Max. cable length Up to 20 m (observe warnings regarding the minimum section and type of cables)
Possibility of address assignment
UP to 7 detectors with protection function and 2 with opening command function
Automatic synchronisation prevents interference between the various detectors
Ambient operating temperature -20 ÷ 50°C
Use in particularly acid, saline or
potentially explosive atmospheres
No
Assembly Vertical, wall-mounted
Protection rating IP44
Dimensions/weight 64 x 89,2 h 29 mm / 60 g