DISPLAY AND MENU OPTIONS
Table 9. Smart DC Controller - User Menu Functions
Ref.
No.
User Menu
Display
Setting Options
(Bold = Factory
Settings)
Menu Tasks and Explanations
Associated
DC Controller
Connections
6
BF 2 (ON 2 SEC)
WARN BEFORE OPER
0 = off
1 = on
2 = on
Controls warn-before-operate
buzzer and can be con
fi
gured
three ways:
Set to 0: Buzzer is disabled. Set at
0, buzzer will still beep when alerts,
faults, errors, or entrapment are
detected.
Set to 1: Buzzer beeps for 3
seconds before gate motion
begins and continues through
entire gate travel.
Set to 2: Buzzer beeps for 3
seconds before gate motion
begins and continues for 2
seconds of gate travel.
(N/A)
WARNING:
Do NOT
cut wires
to buzzer
or unplug it
as operator
will not be in
compliance
with UL 325.
Failure to
comply may
result in
serious injury
or death.
7
PE 0 (OFF)
PHOTO EYE ALIGN
0 = off
1 = on
When set to 1, operator serves
as an aide in photo-eye emitter/
receiver alignment. Buzzer chirps
once when emitter and receiver
are not aligned. When emitter and
receiver are aligned, buzzer chirps
twice. If they go out of alignment
again, buzzer will chirp once.
Alignment Mode is reset with a
limit input or reset input.
Sensor
Common,
Sensor 1,
Sensor 2,
Sensor 3
8
CL 0
SET CLOCK
0 = Display
1 = Set Clock
To set or adjust minute, hour, day,
month or year, select 1. Once clock
is set, display automatically returns
to 0 setting. Signi
fi
cant gate events
are logged and stamped with time
and date. This feature is useful
to read historical operation data,
which can be accessed with a
computer via USB or RS232 port or
the LG setting in User Menu. See
"Setting the Time and Date" on
page 48.
(N/A)
MX4505 Rev. E ©2020
52
hysecurity.com | 800-321-9947
SlideSmart DC Programming and Operations
