Mounting horizontal solar panels (PL) in a horizontal row
The different installation variants that are covered here are:
႑
Bitumen roof, horizontal rows (PL)
As described previously, the solar panels can be mounted on
a number of different mounting points, brackets / roof types.
How the different mountings should be installed is described
in Roof mountings on page 57.
NOTE
The minimum number of mounting points only cover
a part of the potential wind and snow load.
Mounting points are adapted to the local conditions.
1. Installing the mounting rails
Roof mounting of landscape solar panels (PL) is carried out in
the same way as with horizontal standard solar panels(PL).
The width of the solar panel means that it is installed with 2
metre rails. The diagram for mounting points is therefore
changed as follows:
Dimensions
A: 2000 mm
B: 1875 mm
C: 1825 mm
D: 300 mm
E: 600 mm. 770 mm
The mounting system must be installed as illustrated. Otherwise
the mounting rail joint connections and brackets can collide.
If a connection cannot be made where the solar panel should
sit in the installation, the mounting rail and the joint connec-
tions should be pre-installed and aligned before they are
mounted on the roof.
A
B
B
B
C
B
B
C
C
B
E
D
D
D
D
D
D
2. Continued installation of solar panels according to
the principles of the previous instructions, see page 18.
SOLAR FP215 P/PL
Chapter 4 |
Mounting
34
