(c) Mounting rails on raised sealing plate (bitumen roofs)
The mounting rails are secured in the roof mountings with
M10 bolts and a rubber gasket between the raised sealing
plate and the adapter.
Also see Mounting raised sealing plate (bitumen roof) on page
60.
(d) Mounting rails on universal fixing plate (corrugated
metal roof)
The mounting rails are secured in the roof mountings with
screws M10 x 25, washer and self locking nut.
Also see Universal fixing plate for corrugated metal roof on
page 59.
(e) Mounting rails on coach bolts (universal plus slate
roofs)
Correct conditions are required for this variant.
The mounting rails are set on pin bolts that are fixed wit the
upper and lower nuts, the arrow indicates where the mounting
rail should be.
Caution
The coach bolt should only be used if the base it is
to be screwed into is substantial and strong. This
must be established by the installation company.
The installer must evaluate if the moisture protection is suffi-
ciently secure, this is based on factors such as roof pitch in
relation to the rubber seal’s position against the roof base,
the smoothness of the roof base also has an impact.
Also see Universal fixing with coach bolt on page 62.
17
Chapter 4 |
Mounting
SOLAR FP215 P/PL
