(a2) Adjust the height of the rail
The rails are adapted to the local conditions by slackening off
the rail as illustrated, and then moving to the correct height.
(b) Mounting rail on standing seam holder (seamed sheet
metal roof)
The mounting rails are secured in the standing seam holders
with screws M10 x 25, washer and self locking nut.
(c) Mounting rails on raised sealing plate (bitumen roofs)
The mounting rails are secured in the raised sealing plate with
screw M10 x 25, washer and self locking nut.
(d) Mounting rails on universal fixing plate (corrugated
metal roof)
The mounting rails are secured in the universal fixing plates
with screws M10 x 25, washer and self locking nut.
SOLAR FP215 P/PL
Chapter 4 |
Mounting
30
