This manual describes installation and service procedures
for implementation by specialists.
This appliance is not intended for use by persons (includ-
ing children) with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge, unless
they have been given supervision or instruction concern-
ing use of the appliance by a person responsible for their
safety.
Children should be supervised to ensure that they do not
play with the appliance.
Rights to make any design or technical modifications are
reserved.
©NIBE 2011.
Symbols
NOTE
This symbol indicates danger to machine or
person.
Caution
This symbol indicates important information
about what you should observe when maintain-
ing your installation.
TIP
This symbol indicates tips on how to facilitate
using the product.
Marking
SOLAR FP215 P/PL is CE marked and fulfils IP21.
The CE marking means that NIBE ensures that the product
meets all regulations that are placed on it based on relev-
ant EU directives. The CE mark is obligatory for most
products sold in the EU, regardless where they are made.
IP21 means that the product can be touched by hand,
that objects with a diameter larger than or equivalent to
12.5 mm cannot penetrate and cause damage and that
the product is protected against vertically falling drops.
Warranty
The manufacturer's warranty for solar panels applies for
60 months from the date of delivery to the installer.
For solar panel accessories such as pumps, solar energy
controls, expansion tanks, solar energy connection pipes,
roof mountings, solar energy tanks, connectors, valves
etc. the manufacturer's warranty applies for 24 months
from the date of delivery to the installer.
The warranty applies if the installer has filled in and signed
the installation protocol supplied and sent it in to NIBE
in the relevant country within 2 months of the installation
being completed.
The Installation protocol can be sent via e-mail, fax or
letter and the proof of receipt or counterfoil must be
saved. This is then signed by NIBE in the country which
indicates any measures that need to be made by the in-
staller. The signed copy is then sent to the owner of the
system.
The warranty does not apply if the unit has not been in-
stalled correctly, or if there has been carelessness with
the components, or incorrect sizing, or handling faults
or insufficient maintenance, or other fault management
according to common practice.
The warranty does not cover damage in or to the building
or damage to other equipment or property that has been
caused directly or indirectly by faulty solar products. The
warranty does not apply in event of incorrect installation
or handling.
The warranty does not cover damage caused by fire,
water damage, external impact, vandalism or weather
related damage such as excessive snow, storms or thun-
derstorms etc.
NOTE!
Warranty faults must be notified within 14 days.
Copyright
The manufacturer retains the copyright for this manual.
These instructions may only be distributed, translated or
copied with the written permission of the manufacturer.
We reserve the right to make changes to the specifica-
tions or illustrations in this manual without prior notifica-
tion.
SOLAR FP215 P/PL
Chapter 1 |
Important information
2
1 Important information
