NF wf1966, Instruction Manual

Page: 43 / 198

3.3 Basic operation
WF1966
3-15
Initialized settings
：
Initialized settings are indicated in the table.
Settings related to output on/off, output on/off at power on, arbitrary waveform, setting memory, user units ,
remote control, GPIB address, GPIB delimiter, and USB ID are not initialized.
Initialization table
Key operation Menu Initial settings Remarks
CH 1/CH 2 CH 1(BOTH is off)
CHANNEL MODE INDEP
MODE NORMAL
TYPE BURST
SOURCE
EXT (1 ms, at INT)
When TYPE=TRIG, GATE,T-GATE
SOURCE(CH2)
EXT CH2 (1 ms, at
INT)
When TYPE=TRIG, GATE,T-GATE
DELAY 0.3
µ
s When TYPE=TRIG
MARK 1.0 When TYPE=BURST, TRIG
SPACE 1.0 When TYPE=BURST
STOP-LEVEL OFF (0%, at ON).
MODE
→
BURST
OPER-COMMO
N OFF Both channels MODE=BURST,
TYPE=TRIG, GATE or T-GATE,
same TYPE.
TYPE FREQ
SOURCE
EXT (1 ms at INT)
When MODE=SINGLE, GATED
SOURCE(CH2)
EXT CH2 (1 ms, at
INT)
When MODE=SINGLE, GATED
MODE SINGLE
FUNCTION
LIN
TIME 1 s
STOP-LEVEL OFF (0%, at ON). When MODE=GATED
MODE → SWEEP
OPER-COMMO
N OFF When both channels SWEEP MODE
START 1000 Hz
STOP 10000 Hz
CENTER 5500 Hz
SPAN 9000 Hz
MODE → SWEEP,
TYPE=FREQ
MARKER 5000 Hz
START 0.1 Vp-p
STOP 1 Vp-p
CENTER 0.55 Vp-p
SPAN 0.9 Vp-p
MODE
→
SWEEP,
TYPE=AMPTD
MARKER 0.5 Vp-p
START 0.1 V
STOP -0.1 V
CENTER 0 V
SPAN 0.2 V
MODE
→
SWEEP,
TYPE=OFFSET
MARKER 0 V
Continued next page