NF wf1966, Instruction Manual

Page: 162 / 198

6.1 Error message
6-4
WF1966
continued from previous page
Error message Cause or corrective measures
STORE/RECALL MEMORY
LOST Setting storage memory contents destroyed and settings cannot be
recalled.
Contact dealer.
WARNING 001 Combined frequency and duty set the pulse width to not more than
6.25 ns and the pulse may be lost.
WARNING 002 Because the pulse width is set to 6.25 ns to 100 ns due to the
combination of frequency and duty, the pulse width may become
unstable (large jitter component).
WARNING 003 Since high frequency, burst oscillation mark and space may be
unstable.
WARNING 004
Low level setting changed due to high level setting change, or
conversely, high level setting changed due to low level setting
change.
WARNING 005
Changed to simple standard units (Hz, s, Vp-p, V).
WARNING 006
Since combined period and pulse width exceed the permissible
duty setting range, pulse width was changed in order to enter the
permissible duty range.
Since the permissible tr/tf setting range by combined frequency
and duty changed, tr/tf was changed to be within the setting range.
WARNING 007
Changing the frequency relationship exceeded the permissible
frequency setting range for the other channel. Therefore, the
frequency relationship of both channels was changed to within this
range.
WARNING 008
Because of channel mode change, the oscillation mode was
changed to normal.