5.1 Convenient Settings
WF1966
5-5
When DUTY-VALID is set to CYCLE, the duty will be reflected starting at the next period.
If the frequency or phase is changed, extra pulses may be output even if DUTY-VALID is set to
CYCLE.
Operation when DUTY-VALID: IMMED
The setting is reflected at the same time that the duty is changed
Operation when DUTY-VALID: CYCLE
Duty change
The setting is reflected starting at the next period
• The duty setting range for the
square wave (variable duty) can be switched to 0.0000% to
100.0000% or 0.0100% to 99.9900%. To set the duty in the range of 0.0000% to 100.0000%, set
DUTY-VALID to EXPAND.
I M M E D
C Y C L E
E X P A N D
S Y S T E M :
3
D U T Y - V A L I D
S Y N C
O U T
However, it is not possible to set CYCLE and EXPAND simultaneously.
When DUTY-VALID is set to IMMED or CYCLE, the duty setting range becomes 0.0100% to
99.9900%. When the frequency is approximately 16 kHz or less, pulse losses can be prevented by
restricting the duty range to 0.0100% to 99.9900%.
Summary of Contents for wf1966
