NF wf1966, Instruction Manual

Page: 144 / 198

5.3 Setting memory
5-16
WF1966
„
Setting recall (
MEMORY
: RECALL)
Operation to recall settings from memory is described.
Operation:
①
Press the
MEMORY
key, then use the and keys to produce the following display
(RECALL flashes).
R E C A L L M E N U
M E M O R Y
: S T O R E R E C A L L C L E A R
② Press the
ENTER
key, then use the and keys to produce the following display (0
flashes). In this example, TEST 1 is recalled from memory.
T E S T 1
S T O R E : 0 1 2 3 4 5 6 7 8 9
③
Press
ENTER
key for recall.
Other:
• If the keypad is pressed at above step ② , the pressed memory number is recalled. Only the stored
numbers of the keypad light.
• Items stored in the setting memory and user unit settings are noted in Section [3.3 Basic operation,
Setting initialize]. The following items do not change before and after recall.
• Channel selection
• Output on/off
• Output on/off state at power on
• Arbitrary waveform parameter
• Type of remote control
• GPIB parameter
• USB ID