NF wf1966, Instruction Manual

Page: 178 / 198

8-4
WF1966
8.2 Output voltage
z Output voltage (FUNCTION OUT)
Output range
Amplitude
Range
Resolution
Accuracy
DC
offset
Range
Resolution
Accuracy
Amplitude and DC offset
limiting
Output
impedance
Load impedance
Output connector
Others
10 V range / 1V range fixed, or automatic switchable
10 V range : 0 mVp-p to 20.000 Vp-p/open
1 V range : 0.0 mVp-p to 2.0000 Vp-p/open
10 V range : 1 mVp-p/open
1V range : 0.1 mVp-p/open
Continuous oscillation, external AM off,
, 1 kHz, rms value measured
10 V range :
±
(1 % of amplitude setting [Vp-p] + 0.05 Vp-p)/open
1 V range :
±
(1 % of amplitude setting [Vp-p] + 0.01 Vp-p)/open
10 V range :
±
10.000 V/open
1 V range :
±
1.0000 V/open
10 V range : 1 mV/open
1 V range : 0.1 mV/open
10 V range :
±
(0.5% of DC offset setting [V] + 0.1 V)/open
1 V range :
±
(0.5% of DC offset setting [V] + 0.01 V)/open
When DC voltage is generated for both cases
If output voltage exceeds the following value, the OVER light blinks
and the output may be clipped.
10 V range : 11 V/open
1 V range : 1.1 V/open
50
Ω
, unbalanced
45
Ω
and more, nominal
Front panel, BNC receptacle (FUNCTION OUT)
Output voltage can be set with high and low level buttons.
z SYNC OUT Output voltage (SYNC OUT)
Output voltage
Output waveform
Rise/fall time
Output impedance
Load impedance
Output connector
0/+5V (open)
2.5 ns
50
Ω
, unbalanced
45
Ω
and more
Front panel BNC receptacle (SYNC OUT)