Nexcope NE620T Manual Download

Page: 13 / 64

Immersion oil

• When using immersion oil, it is essential to read the relevant safety data sheet.

Immersion oil irritates the skin. Therefore avoid contact with skin, eyes and clothing.

• In case of skin contact:

wash off with plenty of water and soap.

• In case of eye contact:

rinse immediately with plenty of water for at least

5 minutes.

• In case of prolonged irritation:

consult a specialist.

Depending on the type of oil used, it might be harmful to the environment, espe-

cially aquatic organisms.

1.9. Protection and storage

• Protect the device against dust and moisture.

• Avoid putting fingerprints and equal contaminations on any optical surfaces.

• Pull a dust protection cover over the microscope. Before covering the microscope, al-

ways check that the microscope is also switched off.

• Store it in a closed container at a dry and mould-free place.

• Store the microscope and the accessories in the relevant containers when they are not

used for a longer time.

• It is recommended to store also objectives and eyepieces in closed containers with

desiccant.

A dust protection cover is included in delivery.

Remember:

A well maintained microscope will keep its optical quality for years and thus main-

tain its value.

IMPORTANT NOTES

Summary of Contents for NE620T

































































Search results

Summary of Contents for NE620T

Reviews:

Related manuals for NE620T

Brands by name

Popular brands

Nexcope NE620T, Manual

Search results

Summary of Contents for NE620T

Reviews:

Related manuals for NE620T

Brands by name

Popular brands