Nexcope NE620T, Manual

Page: 22 / 64

22
4
Using the C-mount camera adapters
I
C-mount
0.5x 1x
II
III
IV
A
Illustration 006: Attaching the C-mount camera adapters.
Using a C-mount camera
If not already pre-installed, place the C-mount
adapter (0.5x or 1x - depending on the cam-
era type) (I) in the port of the trinocular view-
ing head (II).
Fix both elements by tightening the set screw
(III).
0.5x C-mount adapter for sensor siz-
es up to 2/3”.
1x C-mount adapter for sensor sizes of 1”.
Use a suitable Allen key (IV) for
mounting the camera adapter.
1x C-mount adapter is included in
delivery.
0.5x C-mount adapter is not includ-
ed in delivery but can be ordered as
accessories.
VI
V
B
If you do not want to use a camera, please
use the appropriate protective cap (V) of the
camera adapter to protect the interface from
dust.
The protective cap is screwed onto the cam-
era adapter.
When installing the camera, please
always make sure that you hold it
firmly in place to protect it from dam-
age due to dropping.
Setting the camera:
Parfocality: Observe the desired ob-
ject through the eyepiece and focus
the image. Then install the camera and
adjust the image on the monitor ac-
cordingly. With the set screw (III) you
can align and tighten the camera in a
suitable position.
Setting the camera:
After obtaining a clear image by bin-
ocular observation, observe the image
on the computer or monitor. If it is not
sharp, please turn the focusing ring (VI)
on the camera adapter until the image
is sharp enough.
3
DESIGN OF NE620T