Nexcope NE620T, Manual

Page: 10 / 64

10
1.4. Safety symbols used in the manual
Danger symbols
Warning of a danger point
This symbol indicates information that must be read and observed.
Non-observance can lead to:
o Risk of injury
o Malfunctions or equipment damage
Warning of dangerous electrical voltage
This symbol precedes information that must be read and observed.
Non-observance can lead to:
o Risk of injury
o Malfunctions or equipment damage
Warning symbol
Warning symbol indicates a possible source of danger
Failure to follow the warnings may result in injury to the user and/or
damage to the microscope (including nearby objects).
Note symbol
Important additional hint
Accompanying instructions serve to simplify operation and maintenan-
ce.
1.5. Safety symbols on the microscope
The following symbols are located on the microscope/accessories and
should always be observed:
The device manufacturer is legally obliged to take back
defective devices for recycling.
EC Declaration of Confirmity
Bresser GmbH has issued a “Declaration of Conformity” in accordance
with applicable guidelines and corresponding standards.
Caution LED Radiation
The LED module of the incident light fluorescence lighting system emits
class 3B LED light. Direct exposure to the light and direct incidence of
light on the skin must therefore be avoided at all costs. When micro-
scopes are used, the protective devices provided with the microscope
must always be used. Never - neither with nor without optical instru-
ments - look into the light beam, not even to simply look at the sample.
Failure to observe this warning may result in eye damage!
1
IMPORTANT NOTES