newster NW30, User Manual

Page: 201 / 220

Maintenance
77
ENG_Manual_NW30-R01-01 Sterilizer NEWSTER

NW30
4.3.2. Changing printer paper
Use only thermal printer paper. Width 57,mm (+/-0,5mm) and the diameter should be less
than 50mm. To change paper do as follows (see diagram below):

Open the printer's door and press on the support of the tilting mechanism of the
printer where it indicates PUSH:

Place the roll of paper, respecting the direction of rotation as shown in figure:

Press the FEED button to let a few centimeters of paper out of the printer and
push again on the support mechanism of the printer where it indicates PUSH, then
replace in the original position:

Rip the paper and close the door by inserting the card slot in the door itself.
4.3.3. Vertical blade changing.
Vertical blades (MF01552) cut and open wastes bags, to spread the wastes inside the cell.
They should be changed, when problems with opening bags appear or after 1000 cycles. For
the substitution of the blades please follow the described procedure:
Fig. 63

With a N°6 Allen key unscrew the FX00283 bolt

Remove the MC01553 component.