newster NW30, User Manual

Page: 173 / 220

Instructions for the user
49
ENG_Manual_NW30-R01-01 Sterilizer NEWSTER

NW30
Touch the blank field again an alphanumeric keyboard appears. Use it to write all the data. In
this data base it is possible to set up the following values:

Main motor in first speed: after this time the motor changes speed.

Time ON pump first start: at the beginning of the cycle, a pump with deodorizer
(when present) works for the time indicated.

Time ON pump second start: During the cycle a pump with deodorizer (when
present) starts again and works for the time indicated.

Temperature delay OK: once that temperature is measured on the PLC, the
temperature changes after the time indicated, in order to prevent that a noise
signal has any effect on the cycle.

Discharge door delayed opening: when the discharging temperature is reached
PLC waits the time indicated before opening the hatch, to prevent vapour leaks.

Product discharge time: the discharging phase will last the time indicated.