April 2018
51
FPM-8220
ENABle:EVEnt <nrf value>
Common
Device Dependent
Front Panel
Action
Enables bits in the device event status enable register.
.
Parameters
0 to 65535
Notes
Enabled/disabled events can be read by ENABle:EVEnt?.
Event status may be monitored by EVEnt?.
Bit 2 of the status byte register is set if any device enabled events are true, for generation of service
requests.
See Chapter 3 for more information about register structure.
Enable registers normally retain their values through power OFF/ON, unless the power-on status
clear flag is set true. See *PSC.
Examples
ENAB:EVE 4 - Enables over-range event to be summarized in the status byte bit 2.
Enable:event #H4 - Same as ENAB:EVE 4, except using hexadecimal numbering. See RADix.
ENABle:EVEnt?
Common
Device Dependent
Front Panel
Action
Requests the value in the device event status enable register.
Response
a value between 0 and 65535
Notes
Enabled/disabled events can be set by ENABle:EVEnt. Changing event status may be monitored by
EVEnt?. See Chapter 3 for more information about register structure.
Examples
ENAB:EVE? - Response 2048 means that measurement ready will be reported in status byte bit 2.
Enable:event? - Response #H800 is the same as 2048, except using hexadecimal numbering. See
RADix.
Numeric
Value
Over-range
Under-range
4
8
= Unused bits
Measurement data ready
2048
Numeric
Value
Over-range
Under-range
4
8
= Unused bits
Measurement data ready
2048
Summary of Contents for FPM-8220
