www.newrocktech.com
3-17
3.4 Installing the ATA
3.4.1
Connecting the ATA to the LAN
Step 1
Connect the WAN port of the ATA to the LAN switch.
Step 2
Connect the FXO port of the ATA to the telephone line provided by a telecom operator or an
extension line from another PBX.
Step 3
Connect the FXS port of the ATA to an analog phone or a fax machine.
Step 4
Connect the PWR port of the ATA to the power adapter supplied with the ATA and then connect the
power adapter to an electrical outlet. The PWR LED turns blinking green to indicate that the ATA is
starting and will be in steady green to indicate that the device is running normally.
3.4.2
Finding the IP address of the ATA
By default, the IP address of ATA is automatically obtained by DHCP. The IP address can be obtained by
using these methods:
Method 1:
If ATA has FXS port: dial “##” to obtain device IP address by an analog telephone
connected to the FXS port after the equipment is powered on.
Method 2:
If ATA without FXS port: obtain device IP address via New Rock’s Finder software.
How to obtain device IP address via Finder:
Step 1
Double click and allow to run this application on your PC.
Step 2
Click Refresh, and the MAC address and IP address of target models will be listed.
Note: Please connect your PC to the device via Ethernet cable if no devices are found.
