- 89 -
NL4500G4 TRIDENT
www.New-Leader.com
(800) 363-1771
313974-AA-B
Header
Machine Con
fi
guration
NOTE:
Refer to default settings table at end of controller section for factory setup defaults.
NOTE:
Before use, Display Monitor must be setup to enable VT connection and a machine con
fi
guration
may need to be built. See Manufacturer’s Operations Manual for detailed instructions on these
processes.
Initial Con
fi
guration/Factory Setup
(Only seen on
fi
rst boot, or if system is reset/recon
fi
gured)
• Power up Display Monitor and activate VT.
• Alert screen appears identifying that system is not
con
fi
gured. Press
to continue.
Overview of attached modules:
• Number of spreader modules will be shown along
with any add on modules. Press
to continue.
Controller Operations
