manualshive.com logo in svg

New Leader NL4500G4, Operator'S Manual

Share
Download
New Leader NL4500G4 Operator'S Manual Download Page 90

- 90 -

www.New-Leader.com

(800) 363-1771

313974-AA-B

NL4500G4 TRIDENT

Header

Enable Installed Bins

•  Enable all bins that are installed on the unit by 

pressing the button next to each.  A 

 will 

appear next to enabled bins as shown.  Press 

 

to continue.

Bin Settings

Bin settings include Name, Capacity, Bin Sensor, 

Feedgate enabled/disabled, and Pressure 

Transducer calibration.

•  Enter Capacity for Main Bin using keypad.  Enable 

or disable bin level sensor as required.  Press 

 

to edit pressure transducer settings.  If standard 

transducers are being used, press 

 to continue.

•  Enable transducers and set calibration settings as 

necessary (adjust only if standard  HECO provided 

transducers are not being used).  Press 

 to 

continue.

•  Repeat step 3 for MultApplier or MultiBin Bin 2 as 

necessary.  Press 

 to continue.

Controller Operations

Summary of Contents for NL4500G4

























































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands