- 109 -
NL4500G4 TRIDENT
www.New-Leader.com
(800) 363-1771
313974-AA-B
Header
Conveyor Calibration
For best results, a catch test must be
done for each product to be spread
before season begins, or any time a
new supply of product is received.
• Press
to calibrate conveyor.
• Manually enter cubic feet per revolution (CFR) rate
using keypad.
• To begin catch test, press
for the bin to be
tested.
• To perform in-
fi
eld calibration, press
for
the bin to be tested.
Do not work near rotating
spinners. Severe injury can result
from contact with moving parts.
• Spinners will automatically shut off. For added
safety, disconnect PWM valves. Press
to
continue.
• Verify Feed Gate Height and Product Density are
correct. Use keypad to edit as needed. Enter
Dispense Amount using keypad. Press
to
continue.
• Bring engine up to full operating RPM.
Controller Operations
