NTI SERIMUX SERIES SSH CONSOLE SWITCH
60
Syslog
The Syslog page contains the settings that effect the location, size, name, and destination when downloaded of the System Log.
The System log displays a listing of all users that have logged in and out of the SERIMUX, providing the date and time of their
login and logout. It also displays when configuration changes are made. From the Syslog page, log records can be deleted to
make room for more.
Figure 93- Syslog page
Under “Administrative Settings” in the main menu, select “Syslog”.
Setting
Value
System Log Settings
Syslog Location
System Memory (no options as of this printing)
Syslog Facility
Local0 (no options as of this printing)
Log Buffer Size
0-999 K bytes
Log File name
1-100 characters
View System Log
None- view accumulated system logs
Clear System Log
delete system logs
Syslog-ng Config
Syslog Destination
File / TCP / UDP
Path
drive and directory (when destination is File), or IP address (when destination is TCP or UDP)
View / Clear System Log
None- view accumulated system logs and clear them if desired
A list displaying up to 1K bytes of log records is displayed (use the scroll bar to see all of them). Press the “
Next>>”
button to
display the next 1K byte of log records. The System Log can be viewed and cleared from this page.
To store syslog data in locations other than on the SERIMUX, configure the Syslog-ng Config settings for writing it to a flash drive,
NFS, or sending it to a remote location via TCP or UDP.
Press “
Clear Log
” to delete the complete syslog record.
Note: The syslog will be cleared completely and immediately and will not be retrievable when “Clear Log” is pressed, so
be sure that is what you want to do.
When changes are complete, press “
Save & Apply
” to make them take effect immediately in the SERIMUX.
