NTI SERIMUX SERIES SSH CONSOLE SWITCH
46
Note: The user must click inside the window before typing any characters.
Figure 69- SSH Port connection via Java Applet
If the port is already in use, the message “
Serial port is already in use......try later
” will appear in a SSH
window.
If the port is configured as a user port and not a host port (see Port Configuration- page 48) after logging in to the port the
message “
Serial port Not in host mode
” will appear.
With the user name and password entered, the message “Welcome!” will appear and the user will be directly communicating with
the serial device.
Figure 70- SSH Port connected
A host using SSH v.2 protocol
will require user name and
password to be entered in the
above window for connection
This window will not appear
when authentication is disabled.
