NTI SERIMUX SERIES SSH CONSOLE SWITCH
35
The update firmware path, when using a tftp server will be:
/tmp/
serimux_ssh_vx_xx.tar.gz
When using a tftp server, before using the Update Firmware command, run the following commands from the shell prompt:
cd /tmp
tftp -r serimux_ssh_v1_10.tar.gz -g <tftp-server-ip>
(i.e.
tftp -r serimux_ssh_v1_10.tar.gz -g 192.168.3.151)
serimuxconfig
(This will open the SERIMUX Configuration menu-proceed with update)
3. Press <
2
>-<
Enter
> to select “Update Firmware”. You will be prompted for a <
y
> for yes or <
n
> for no to confirm that this is
the action you want.
Figure 52- Firmware update- confirm to perform update
When the update is complete, you will see the message “
Firmware Update done
.”
Figure 53- Firmware update- Completed
4. Press <
x
>-<
Enter
> to exit the configuration menu. You will be prompted for a <
y
> for yes or <
n
> for no to confirm that you
want to exit the menu. Press <
y
>--<
Enter
>.
5. Type <
reboot
> to reboot the SERIMUX and have the new firmware take effect.
