NTI SERIMUX SERIES SSH CONSOLE SWITCH
33
Figure 48- Administration Settings-System Log settings
Figure 49- Administration Settings-Syslog-ng Configuration
Setting
Value
System Log Settings
Syslog Location
System Memory (no options as of this printing)
Syslog Facility
Local0 (no options as of this printing)
Log Buffer Size
0-999 K bytes
Log File name
1-100 characters
View System Log
None- view accumulated system logs
Clear System Log
delete system logs
Syslog-ng Config
Syslog Destination
File / TCP / UDP
Path
drive and directory (when destination is File), or IP address (when destination is TCP or UDP)
To store Syslog data in locations other than on the SERIMUX, configure the Syslog-ng Config settings for writing it to a flash drive,
NFS, or sending it to a remote location via TCP or UDP.
Example
: For remote location via TCP or UDP,
1. select the file destination (i.e. UDP).
2. enter the IP address of the remote machine
Syslog info will now be sent to the remote machine.
Note: The syslog will be cleared completely and immediately and will not be retrievable when “Clear System Log” is
selected, so be sure that is what you want to do.
