NTI SERIMUX SERIES SSH CONSOLE SWITCH
54
Network Management
IP Configuration
The IP Configuration page is where the settings are applied to enable the SERIMUX to connect to the local LAN or Internet. Only
one connection is necessary, but two can be configured for remote SERIMUX access redundancy.
Figure 85- IP Configuration page
Under “Network Management” in the main menu, select “IP Configuration”. This page is in two sections. Settings for IP
Configuration 1 will effect communication at the “Ethernet 1” port and settings for IP Configuration 2 will effect communication at
the “Ethernet 2” port. Be sure to apply valid information in the blocks provided.
Default Settings include:
-
IP address: 192.168.1.91
-
Subnet Mask: 255.255.255.0
-
Default Gateway: 192.168.1.1
The Ethernet Mode can be set for :
-
100 Base T Full Duplex
-
100 Base T Half Duplex
-
10 Base T Full Duplex
-
10 Base T Half Duplex
-
Auto Negotiation (default setting)- to allow the SERIMUX to select what will work best for your
connection.
For “Ethernet 1”
For “Ethernet 2”
