manualshive.com logo in svg

NETGEAR WAX618, User Manual

The NETGEAR WAX618 user manual is an essential guide that ensures a seamless installation and optimal use of this remarkable product. You can effortlessly download it for free from manualshive.com, providing you with all the necessary instructions and insights to harness the full potential of your NETGEAR WAX618.

Share
Download
background image

If your browser displays a security warning, you can proceed, or add an exception
for the security warning. For more information, see What to do if you get a browser
security warning on page 42.

3. Enter the access point user name and password.

The user name is admin. The password is the one that you specified. The user name
and password are case-sensitive.

If you previously added the access point to a NETGEAR Insight network location and
managed the access point through the Insight Cloud Portal or Insight app, enter the
Insight network password for that location. For more information, see Connect over
WiFi using the NETGEAR Insight app on page 24.

The Dashboard page displays.

4. Select Management > Maintenance > Upgrade > Firmware Upgrade.

The Firmware Upgrade page displays.

5. From the Upgrade Options menu, select SFTP.

6. Specify the following server settings:

•

Firmware File: The name of the access point firmware file on the SFTP server.

•

SFTP Server IP: The IP address of the SFTP server on your network.

•

User Name: The user name that is required to access the SFTP server.

•

Password: The password that is required to access the SFTP server.

7. Click the Upgrade button.

WARNING:

To avoid the risk of corrupting the firmware, do not interrupt the update.

For example, do not close the browser, click a link, or load a new page. Do not turn
off the access point. Wait until the access point finishes restarting and the
Power/Cloud LED remains solid green or solid blue.

The firmware update process takes several minutes. When the update is complete,
the access point restarts.

8. Verify that the access point runs the new firmware version by logging back in to the

access point.
The firmware version is displayed on the Dashboard page.

User Manual

164

Manage and Maintain the Access
Point

Insight Managed WiFi 6 AX3000 Access Point Model WAX618

Summary of Contents for WAX618








































































































































































































































































Reviews:

No comments

Related manuals for WAX618

IgniteNet AC866 Quick Start Manual preview
AC866
Brand: IgniteNet Pages: 63
Ebyte E18-MS1PA-PCB User Manual preview
E18-MS1PA-PCB
Brand: Ebyte Pages: 16
CES RF-NET Installation And Commissioning Manual preview
RF-NET
Brand: CES Pages: 30
Ubiquiti UniFi AP AC Outdoor Quick Start Manual preview
UniFi AP AC Outdoor
Brand: Ubiquiti Pages: 26
OBERON 1047-FPDOME Installation Manual preview
1047-FPDOME
Brand: OBERON Pages: 3
Loopcomm LP-9318A User Manual preview
LP-9318A
Brand: Loopcomm Pages: 36
Cisco AT&T U-VERSE VEN401 User Manual preview
AT&T U-VERSE VEN401
Brand: Cisco Pages: 52
Cisco Aironet 2600 Series Getting Started Manual preview
Aironet 2600 Series
Brand: Cisco Pages: 38
Cisco C9117AXI-ME-x Getting Started Manual preview
C9117AXI-ME-x
Brand: Cisco Pages: 36
Cisco Aironet 1850 Series Deployment Manual preview
Aironet 1850 Series
Brand: Cisco Pages: 67
Cisco Aironet 3600 Series Getting Started Manual preview
Aironet 3600 Series
Brand: Cisco Pages: 40
Cisco DigiStar E320.1 User Manual preview
DigiStar E320.1
Brand: Cisco Pages: 18
Cisco Aironet 700W Series Getting Started Manual preview
Aironet 700W Series
Brand: Cisco Pages: 31
Cisco DPH650 User Manual preview
DPH650
Brand: Cisco Pages: 36
Cisco Aironet 1815T Getting Started Manual preview
Aironet 1815T
Brand: Cisco Pages: 29
Cisco C9130AXE Series Getting Started Manual preview
C9130AXE Series
Brand: Cisco Pages: 48
Cisco Aironet OfficeExtend AIR-OEAP602I-E-K9 User Manual preview
Aironet OfficeExtend AIR-OEAP602I-E-K9
Brand: Cisco Pages: 26
Cisco Aironet 2700 Series Deployment Manual preview
Aironet 2700 Series
Brand: Cisco Pages: 88

Brands by name

Popular brands

Load more brands