Changes are not saved
If you are logged in to the access point’s local browser UI and the access point does
not save the changes that you make on a page, do the following:
•
When entering configuration settings, always click the Apply button before moving
to another page or tab or your changes are lost.
•
Click the Refresh or Reload button in the web browser. It is possible that the changes
occurred but that the old settings remain in the web browser’s cache.
You enter the wrong password and can no
longer log in to the access point
If you enter the wrong admin password three or more times, access to the access point’s
local browser UI is blocked for a period. For example, if you enter the wrong password
three times, access to the access point might be blocked for five minutes.
The blockage period depends on the number of failed login attempts. During the
blockage period, any attempts to log in to the access point are ignored, even if you
enter the correct password. You must wait until the blockage is lifted, and then you get
a single opportunity
to enter the correct password. If you enter the wrong password
again, the blockage period is extended as described in the following table.
Table 2. Login blockage periods
Blockage period in
minutes
Number of failed
attempts
5
3
10
4
20
5
40
6
And so on
And so on
In addition, the following rules apply to the number of failed login attempts:
•
If the number of failed login attempts is smaller than the number of allowed retry
attempts, the counter for failed login attempts is reset after 30 minutes. For example,
User Manual
245
Diagnostics and
Troubleshooting
Insight Managed WiFi 6 AX3000 Access Point Model WAX618
