NETGEAR WAX214 User Manual Download Page 115

Page: 115 / 152

Table 7. LAN Information - IPv6 section (Continued)

Description

Setting

The IPv6 address of the primary DNS server.

Primary DNS

The IPv6 address of the secondary DNS server, if any.

Secondary DNS

Table 8. Wireless LAN Information - 2.4GHz section

Description

Setting

The WiFi mode, which is fixed at 802.11 ax/n/g/b.

Wireless Mode

The WiFi channel bandwidth. For for information, see Manage the channel high

throughput mode on page 64.

Channel Bandwidth

The WiFi channel. For for information, see Manage the channel or channels on page

65.

Channel

Table 9. Wireless LAN Information - 5GHz section

Description

Setting

The WiFi mode, which is fixed at 802.11 ax/ac/n/a.

Wireless Mode

The WiFi channel bandwidth. For for information, see Manage the channel high

throughput mode on page 64.

Channel Bandwidth

The WiFi channel. For for information, see Manage the channel or channels on page

65.

Channel

Table 10. Statistics Access Point 2.4GHz/5GHz section

Description

Setting

The profile number from 1 to 5, including the 2.4 GHz management SSID.

Profile

The WiFi network name.

SSID

The type of WiFi security on the SSID.

Security

The VLAN ID, if any, that is configured for the SSID.

VID

User Manual

115

Monitor the access point and its
Network Connections

NETGEAR WiFi 6 AX1800/AX3600 Dual Band PoE/PoE+ Access Points, WAX214 and WAX218

Summary of Contents for WAX214

























































































































































Search results

Summary of Contents for WAX214

Reviews:

Related manuals for WAX214

Brands by name

Popular brands

NETGEAR WAX214, User Manual

Search results

Summary of Contents for WAX214

Reviews:

Related manuals for WAX214

Brands by name

Popular brands