ProSafe Wireless-N VPN Firewall SRXN3205 Reference Manual
4-20
Wireless Configuration
v1.0, July 2008
Configuring WPA-PSK and WPA2-PSK
Not all wireless adapters support WPA and WPA2. Client software is required on the client:
•
Windows XP and Windows 2000 with Service Pack 3 or above do include the client software
that supports WPA. The wireless adapter hardware and driver must also support WPA.
•
Service Pack 3 does not include the client software that supports WPA2. Make sure your client
card supports WPA2. The wireless adapter hardware and driver must also support WPA2.
Consult the product documentation for your wireless adapter; WPA client software for instructions
on configuring WPA settings; and WPA2 client software for instructions on configuring WPA2
settings.
To configure WPA-PSK and WPA2-PSK in the Wireless Settings menu:
1.
Click the
WPA-PSK and WPA2-PSK
radio button on the left to enable WPA-PSK and
WPA2-PSK data encryption.
When you select the WPA-PSK and WPA2-PSK data encryption, only the feature selections
for WPA-PSK and WPA2-PSK are made active on screen, while the other options and features
remain grayed out.
2.
Select
PSK
from the WPA with drop-down menu on the right.
3.
Click on the
TKIP + AES
radio button for Encryption on the right.
TKIP + AES is the default encryption.
Figure 4-11
