Wireless Multi-Client Bridge / Access Point / Repeater
Version 1.2
Page 34 of 34
h
802.1x Mode:
select
Disable
or
Enable
for 802.1x
h
Authentication timeout (mns):
enter a value for the authentication time out.
h
RADIUS server IP address:
enter the IP address of the RADIUS server.
h
RADIUS server port number:
enter the port number of the RADIUS server.
h
RADIUS server shared secret:
enter the shared secret of the RADIUS server.
h
Click on the
Save
button to confirm the changes.
6.5.5 WEP
h
Click on the
WEP
link on the navigation bar. On this page you may configure
WEP, which is an acronym for Wired Equivalent Privacy, a security protocol
for Wireless Local Area Networks (WLANs) defined in the 802.11 standard.
WEP is designed to provide the same level of security as a wired LAN. The
image below depicts the configuration screen of the WEP option.
h
WEP Mode:
select
Disable
or
Enable
WEP encryption.
h
WEP key length:
select a WEP key length from the drop-down list. Options
available are
64-bit
and
128-bit
.
h
WEP key:
enter the WEP key.
h
Default WEP key to use:
select a default WEP key to use.
h
Authentication:
select an authentication method. Options available are
Open
,
Shared Key
or
Both
.
h
Click on the
Save
button to confirm the changes.
6.5.6 WDS
h
Click on the
WDS
link on the navigation bar. On this page you may configure
the Wireless Distribution System. The image below depicts the configuration
screen of the WDS option.
