
Wireless Multi-Client Bridge / Access Point / Repeater
Version 1.2
Page 18 of 18
5.2.5 Operation
h
Click on the
Operation
link under the
System
menu on the navigation bar.
Using this page can switch from the Bridge mode to Access Point mode. The
image below depicts the Operation screen.
h
Place a check in the
Access Point
check box, and then click on the
Apply
button. A message box will then appear asking you to confirm the switch.
h
Click on the
OK
button to continue. You will then see the following page.
h
This message indicates that the firmware has now changed to
Access Point
mode. After about 15 seconds you can re-launch you web-browser to the IP