Wireless Multi-Client Bridge / Access Point / Repeater
Version 1.2
Page 16 of 16
5.2.1 Administrator Settings
h
Click on the
Administrator Settings
link under the
System
menu on the
navigation bar. On this page you can configure a user name and password
for the Bridge. The image below depicts the administrator settings screen.
h
User name:
enter a new user name.
h
Administrator password:
enter a new password in the first box, and then re-
type the password in the second box.
h
Click on the
Save
button to save the changes.
5.2.2 Firmware Upgrade
h
Click on the
Firmware Upgrade
link under the
System
menu on the
navigation bar. Using this page you can upload a new firmware on the Bridge.
The image below depicts the Firmware Upgrade screen.
h
Click on the
Browse
button to select the firmware, and then click on the
Upload
button.
h
The upload may take up to 60 seconds to complete. Do not power off the
Bridge while the upgrade is in process.
