Wireless Multi-Client Bridge / Access Point / Repeater
Version 1.2
Page 19 of 19
address of the Access Point (
192.168.1.2
)
h
In order to configure the Access Point, refer to
Chapter 6
.
5.2.6 Reset
h
Click on the
Reset
link under the
System
menu on the navigation bar. Using
this page you can reset the bridge based on the current configuration. The
image below depicts the Reset screen.
h
Click on the
Reboot
button to reset the bridge based on its current
configuration.
5.3 LAN
Click on the
LAN
link on the navigation bar. You will then
see the following options: LAN Settings and DHCP
Settings. Each option is described in detail below.
5.3.1 LAN Settings
h
Click on the
LAN Settings
link under the
LAN
menu on the navigation bar.
Using this you can configure the local IP settings on the bridge. The image
below depicts the LAN Settings screen.
