Wireless Multi-Client Bridge / Access Point / Repeater
Version 1.2
Page 21 of 21
h
Wireless Mode:
select
Point to Multi-Point
or
Point to Point
from the drop-
down list. Use Point to Multi-Point to connect to a wireless Access Point, or
use Point to Point to connect to another Bridge or Station.
h
Peer MAC Address
: enter the MAC address of the peer WLAN Bridge (P2P
Tunnel).
h
Wireless Network Name (SSID)
: the SSID is a unique name shared among
all points in your wireless network. The SSID must be identical for all points in
the network. It is case sensitive and must not exceed 32 characters.
h
Channel:
select a radio frequency from the drop-down list.
h
Transmission Rate (Mbits/s):
select a transmission rate from the drop-down
list.
h
Wireless Connection Mode:
select a connection mode from the drop down
list. Options available are
802.11g Only
,
802.11g Only (Maximum
Performance)
,
802.11b/g Mixed Mode Long,
and
802.11b Only
.
h
Click on the
Save
button to confirm the changes.
5.4.2 Advanced
h
Click on the
Advanced
link under the
Wireless
menu on the navigation bar.
Using this page you can configure the cloning mode and threshold values.
The image below depicts the Advanced Wireless screen.
