68
Installing Hardware Options
a.
From the Configuration view, double-click on
Extended Storage to start the Extended Storage task.
b.
The Extended Storage window opens. The status and
size (in GB) of the Extended Storage System is shown.
Click
Add
to continue.
c.
Select
USB Drive
from the Select Storage Type pane
and then click
Next
.
d.
The Select Operation pane appears. Two selections are
available:
Use Extended Storage:
Configure the appliance
to use the Extended Storage System without
formatting the file system first. Can be used if the
Extended Storage System you have connected to your
appliance has previously been formatted and contains
camera and sensor data already.
Format and Use Extended Storage:
Formats the
Extended Storage System’s file system and then
configures the appliance to use the Extended Storage
System.
e.
Select the operation you wish to perform and then
click
OK
.
If you selected Use Extended Storage, a
confirmation message appears advising you that the
appliance will need to restart to complete the task.
Click Finish to restart the appliance. When the restart
is complete all Extended Storage System functionality
will be available for use.
If you selected Format and use Extended Storage,
a confirmation message appears, advising you that
formatting the extended storage device will destroy
any data stored on the device and that formatting can
take 10 or more minutes to complete, after which the
appliance must restart to begin using extended storage.
Click Finish to complete this task. Once the Extended
Storage System is formatted, your appliance will restart
Summary of Contents for wallbotz 500
