NetBotz wallbotz 500, User Manual, Page: 45 / 80

38
Configuring Network Settings
If you have not installed an additional network
interface (for example, a wireless network adapter),
specify the Ethernet Card settings and then skip to
“Specify the DNS Settings.” on page 41. Be sure to check
the Enable Interface check box when you’ve finished.
To configure your appliance to use network settings
assigned by a DHCP server select the Configure
automatically via DHCP radio button. If desired,
specify a NAT proxy name or IP address that will be
used by a NAT Proxy server in your network to enable
users to connect to the appliance from outside the
firewall. You can also specify
speed and duplex
settings for use by this interface, or leave them set to
Auto Negotiate (the default value).
To specify network settings for use by this
appliance, select the Configure using these settings
radio button and then provide an IP address, subnet
mask, and gatew3ay address for the appliance. If
desired, specify a
NAT proxy name or IP address that
will be used by a NAT Proxy server in your network to
enable users to connect to the appliance from outside
the firewall. You can also specify
speed and duplex
settings for use by this interface, or leave them set to
Auto Negotiate (the default value).
If you have installed an additional network interface,
(for example, a wireless network adapter), an Interface
selection list containing entries for the Ethernet Card and
the Wireless Card appears at the top of the window. The
currently assigned Hostname and IP address (if any) for
each network interface is listed beside its selection list
entry.
To configure the Ethernet Card :
a.
Select Ethernet Card from the Interfaces selection
list and then click Edit .
b.
Specify the Network settings.