NetBotz wallbotz 500, User Manual, Page: 59 / 80

52
Installing Hardware Options
must also be 2.1 or later. Before continuing, please use the
Advanced View Upgrade task to download and install the latest
available applications.
To configure your pod:
1. Start the Advanced View and then select from the
Appliance drop-box the IP address of the WallBotz 500 to
which you have connected the CCTV Adapter Pod 120. Be
sure to log into the appliance using a user account that has
administrator privileges. Once you have logged in, confirm
that the newly connected CCTV Adapter Pod 120 appears in
the Navigation Pane. The default label for CCTV Adapter
Pod 120s is CCTV Video Pod
serial , where serial is the serial
number of the pod.
2. Select the Configuration button and then double-click on
the Camera Pods icon (located in the Pod/Sensor Settings
portion of the Configuration pane).
3. Select from the Camera Pod Configuration pane the entry
that corresponds to the CCTV Adapter Pod 120 and then
click Capture.
4. The Camera Capture Settings window opens. In addition
to the fields that are typically available when using this
window to configure Camera Pod 120s, one additional
control is available when configuring a CCTV Adapter Pod
120:
Video Format: Used to specify the format in which
video is transmitted by the video source. Available
selections include: NTSC-M, NTSC-Japan, PAL-B, PAL-
D, PAL-G, PAL-H, PAL-I, PAL-M, PAL-N
Combination, and SECAM.
5. Use the controls in the Camera Capture Settings window
to configure the camera and image capture settings for use
with the pod. To see an example of an image capture using
the currently selected
Video Format , Brightness ,
Contrast , and Image Quality settings click Apply and the