NetBotz wallbotz 500, User Manual, Page: 74 / 80

67
Installing Hardware Options
4. Connect the MC-36 male connector end of the interface
cable to the interface connector on the Extended Storage
System. The interface connector should be easily accessible
through the opening in the bottom of the wall mount
bracket.
5. Ensure that the Extended Storage System power supply
switch is set to “EXT.”
6. Connect the Extended Storage System to your appliance.
Plug the USB connector on the end of the interface cable
into a USB port on your appliance.
7. Connect the AC power supply to the AC power port on
the Extended Storage System, and then plug the power
supply into an AC power outlet.
8. Using the included strain relief zip tie, connect the USB
and power cables to the wall mount bracket. This will help to
ensure that the cables do not accidentally become unplugged.
9. Power on your appliance.
10. Use the Advanced View License Keys task to activate the
Extended Storage task.
Note: You should have received an Extended Storage
System License Key via e-mail when you placed your order
for this Extended Storage System.
a.
From the Configuration view, double-click on License
Keys to start the License Keys task.
b.
Select Extended Storage System from the list of
available applications and then click Edit .
c.
Type in the Add License Key field the Extended
Storage System license key that you received and then
click
OK .
d.
Click Close to close the License Keys task. The
appliance will restart automatically at this time.
11. Format and use your Extended Storage System. Before
the Extended Storage System can be used by your appliance,
you must use the Advanced View Extended Storage task to
format the file system and configure your appliance to use
the additional storage.