NetBotz wallbotz 500, User Manual, Page: 40 / 80

33
About the NetBotz Installer CD
5. The Choose Install Set window appears. You can choose
to install the Typical product features, Minimal product
features, or Custom product features.
If you choose Typical the Serial Configuration Utility,
product documentation, and Advanced View application
will be installed on your system.
If you choose Minimal only the Advanced View
application will be installed on your system.
If you choose Custom you can select which
components you want installed on your system.
Select a product feature option and then click Next to
continue.
6. The Pre-Installation Summary window appears and
displays information about the installation options you have
chosen. Click
Install to continue.
7. The Register window appears, featuring information on
how to register your product. click Next to continue.
8. The Install Complete window appears. Click Done to
finish your installation and close the NetBotz Installer.
Installing on a Solaris System
To install the applications and the JRE on a supported Sparc
system running Solaris 9 (with all patch bundles recommended
by Sun installed):
1. Place the NetBotz Installer CD-ROM in the CD-ROM drive
of the system that you will use to configure and manage your
appliance. Be sure to mount the drive if necessary.
2. Run install.bin from the Solaris subdirectory on the CD.
For example, if you mounted the CD-ROM drive as /mnt/
cdrom, execute the following command:
sh /mnt/cdrom/solaris/install.bin
3. The NetBotz Installer starts and the Welcome screen
appears. Read the window contents and then click Next to
continue.