netAlly ETHERSCOPE nXG, User Manual

Page: 656 / 723

The Wired Test Port must be linked (by running
an AutoTest Wired Profile ) for the Performance
Peer function to run. If the port is not linked, a
Status message displays, "The wired test port is
not linked."
Performance Peer Setting
The only setting for the Performance Peer
function is the
Communication UDP Port .
Touch the settings button on the Performance
Peer screen to change the port number. The
default NetAlly performance test port is 3842.
NOTE: The UDP port number entered here
must match the port number used by your
source device.
Running the Peer
Tap START on the Performance Peer screen to
start the Peer.
Performance Test App
656