|
AlphaDisc CLD user guide V2.0
57
4.5.1.3.3 The Alerts Tab
4.5.1.3.4 The Reports Tab
4.5.1.3.5 The History Tab
4.5.1.3.6 Settings menu
Enter the Settings menu by clicking on the
icon in the upper right corner of any of the 5 tabs. This menu contains
controller settings. See the list of settings with description in Appendix A. AlphaDisc™ CLD Controller Settings.
Click the setting to change it. Click
Save
to save changes.
ELEMENT
DESCRIPTION
THE UPPER RED / GREY LINE
DISPLAYS THE NAME OF THE CURRENTLY CONNECTED CONTROLLER AND THE
COMMUNICATION STATUS (CONNECTED / DISCONNECTED).
THE SECOND LINE
ENABLES SORTING ALERTS BETWEEN TWO DATES AND RESETTING AN ALERT.
THE ALERTS LIST
DISPLAYS THE ALERT MESSAGES ACCORDING TO THEIR OCCURRENCE TIME AND DATE.
SEE APPENDIX B. ALARMS AND FAULTS LIST.
ELEMENT
DESCRIPTION
THE UPPER RED / GREY LINE
DISPLAYS THE NAME OF THE CURRENTLY CONNECTED CONTROLLER AND THE
COMMUNICATION STATUS (CONNECTED / DISCONNECTED).
THE SECOND LINE
DISPLAYS ICONS OF THE DIFFERENT FLUSH TYPES. SELECT THE DESIRED ICONS TO BE
DISPLAYED ON THE CHART.
THE CHART WINDOW
DISPLAYS THE NUMBER OF FLUSH CYCLES ACCORDING TO THE SELECTED ICONS.
TOTAL FLUSHING CYCLES
THE TOTAL NUMBER OF FLUSH CYCLES CURRENTLY DISPLAYED IN THE CHART WINDOW.
THE LOWER BLACK LINE
ENABLES THE USER TO SELECT THE CHART’S TIME SPAN (DAY, WEEK, MONTH).
ELEMENT
DESCRIPTION
THE UPPER RED / GREY LINE
DISPLAYS THE NAME OF THE CURRENTLY CONNECTED CONTROLLER AND THE
COMMUNICATION STATUS (CONNECTED / DISCONNECTED).
THE SECOND LINE
ENABLES SORTING EVENTS BETWEEN TWO DATES AND DELETING AN EVENT.
THE BLACK LINE
ENABLES FILTERING EVENTS ACCORDING TO THE FOUR FLUSH TYPES (DP, INTERVAL,
MANUAL, PRESET, ANTI FREEZE).
THE EVENTS LIST
DISPLAYS THE EVENTS MESSAGES ACCORDING TO THEIR OCCURRENCE TIME AND DATE.
FLUSH CAUSE, FLUSH DATE, AND FLUSH TIME IS SHOWN IN EVERY RAW OF THE LIST. CLICK
ICON TO SEE THE FOLLOWING INFORMATION:
• INLET PRESSURE BEFORE THE FLUSH
• OUTLET PRESSURE BEFORE THE FLUSH
• DP PRESSURE BEFORE THE FLUSH
• DP PRESSURE AFTER (THE DP MEASURED AFTER FLUSHING. INTERVAL BETWEEN END OF
FLUSHING AND DP MEASURING IS DETERMINED BY “IGNORE DP” PARAMETER).
