|
AlphaDisc CLD user guide V2.0
8
3.1
INSTALLATION ON A POLE
If the AlphaDisc™ CLD controller is supplied separately, it can be installed on a pole using a plate and clamps (not
included).
Instructions:
1. Mount the 100x120 mm plate on the pole using clamps (minimum dimensions).
2. Remove the controller from the bracket (see Figure 3: Removing the AlphaDisc™ CLD controller from the bracket).
3. Tighten the bracket to the plate using 4 screws.
4. Attach the controller to the bracket. Press the controller until you hear “click”.
3.2
INSTALLATION ON A WALL
If the AlphaDisc™ CLD controller is supplied separately it can be mounted on a wall using fasteners (not included).
Instructions:
1. Determine mounting height for easy viewing and access.
2. Remove the controller from its bracket (see Figure 3: Removing the AlphaDisc™ CLD controller from the bracket).
3. Attach the bracket to the wall. Level the bracket by using a water level.
4. Mark the location of the bracket holes on the wall (see fig. below).
5. Using a drill, install 4 wall anchors in the marked locations. Attach the bracket to the wall. Tighten the mounting
screws into the anchors.
6. Attach the controller to the bracket. Press the controller until you hear “click”.
Plate
Bracket
NOTICE
Handle with care
Wall
Bracket
