|
AlphaDisc CLD user guide V2.0
4
1. Safety Instructions
1.1 GENERAL
The manufacturer›s filtration products always operate as components in a larger system. System designers,
installers and operators must comply with all relevant safety standards.
Prior to installation, operation, maintenance and/or any other type of action carried out on the controller, carefully
read these installation and operation instructions.
During installation, operation and/or maintenance of the controller all conventional safety instructions must be
observed in order to avoid danger to the workers, the public and/or to property in the vicinity.
The system is for use for non-hazardous liquids only!
No change or modification to the equipment is permitted without written notification given by the manufacturer or
by its representative(s) on the manufacturer’s behalf.
Always observe standard safety instructions and good engineering practices whilst working in the filter’s vicinity.
Use the controller only for its intended use as designed by the manufacturer only. Any misuse of the controller may
lead to damage and may affect your warranty coverage. Consult with the manufacturer prior to any non-standard
use of this equipment
Do not carry out system cleaning and/or maintenance in an explosive atmosphere.
1.2 INSTALLATION
General
Install the controller according to the detailed installation instructions provided in this manual or in the Quick
Guide provided with the filter or controller.
Make sure to leave enough side and top clearance to enable easy access for safe maintenance operations.
Make sure to have suitable lighting at the filter’s location to enable good visibility and safe maintenance.
Arrange suitable platforms and safety barriers to enable easy and safe access to the controller without needing
to climb on pipes and other equipment. Verify that any platform, barrier, ladder, or other such equipment is built,
installed, and used in accordance with the relevant local authorized standards.
Use only appropriate standard tools and equipment operated by qualified operators when installing, operating, and
maintaining the controller.
When installation is required in hazardous environment sites, underground or high above ground, make sure that
the site design and the auxiliary equipment are appropriate and that installation procedures are carried out in
accordance with the relevant standards and regulations.
Make sure walking areas around the installation are slip resistant when wet.
Shipment and transporting
Shipping and transporting the controller must be done in a safe and stable manner and in accordance with the
relevant standards and regulations.
NOTE
The filter controlled by the controller enters the flushing mode automatically without any prior warning.
