background image

Communication Interface Module

Cat. No. 1784-KT2/B

Installation Data

The 1784-KT2/B Communication Interface Module allows an IBM PS/2
compatible MicroChannel computer to communicate directly with
Allen-Bradley PLC-2 or PLC-3 family programmable controllers.  The
1784-KT2/B also allows an IBM PS/2 compatible MicroChannel computer
to communicate over the Allen-Bradley Data Highway Plus network to all
Data Highway Plus family programmable controllers.

WARNING: The following provides information for
Allen-Bradley Industrial Computer and Communication Group
(ICCG) products that have been verified to meet the
Electromagnetic Interference (EMI) requirements of the Federal
Communication Commission (FCC) and the Canadian
Department of Communications for use in a commercial
environment:

This device complies with Part 15 of the FCC rules.  Operation
is subject to the following two conditions: (1) this device may
not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause
undesired operation.

WARNING: This digital apparatus does not exceed the Class A
limits for radio noise emissions from digital apparatus set out in
the Radio Interference Regulations of the Canadian Department
of Communications.

Le présent appareil numérique n’émet pas de bruits
radioélectriques dépassant les limites applicables aux appareils
numériques de la class A prescrites dans le Règlement sur le
brouillage radioélectrique édicté par le ministère des
Communications du Canada.

Introducing the 1784KT2/B

Communication Interface

Module

Summary of Contents for Allen-Bradley 1784-KT2/B

































Reviews: